Adding Audio to Finale Notation

by Tom Johnson 25. May 2010 04:11

Only Finale allows you to record or import a mono or stereo audio track. Why would you want to add audio in a music notation program? Here are the first three reasons that come to my mind:

  1. To enhance the playback of any chart by adding a recording of a live vocal or instrumental solo.
  2. To create educational materials where notation appears (and scrolls in sync) with a recorded version of any piece.
  3. To aid in transcribing a solo or arrangement: The audio recording can be compared with your notation while transcribing, all in the same program.

Whatever your reason, let’s say you have an audio file you want to import into an existing Finale file. Here’s how it’s done:

  1. Go to Finale’s MIDI/Audio menu and select Audio Track>Add Audio Track
  2. Go to Finale’s MIDI/Audio menu and select Audio Track>Load Audio, then navigate to your audio file and hit “Open.” When the Audio Clip Attributes dialog box appears, ignore it for now; click OK and you’re done.

Now the file plays right alongside your notation; you can mute and solo it accordingly. Here are a few tips that might help as you delve into this further:

  • Use Finale’s TempoTap feature to synchronize the tempo between the notation and the audio file. If you’re new to TempoTap, click here for details.
  • If your notation begins playing BEFORE your audio file, you can either edit off the front of your audio file (I like using the free audacity for this purpose) or you can shift the audio file to the left (earlier) in Finale using the dialog box we just ignored. To do so, go to the MIDI/Audio menu and select Audio Track>Audio Clip Attributes. The “Start in Clip” value appears in hours:minutes:seconds:milliseconds, so you might, for example, enter 00:00:01:000 to shift the audio to the left (earlier) by one second.

I’ll bet you’ve thought of additional ways to use imported audio in Finale. Please share them with us, or let us know how this is working for you, by clicking on the “Comments” button below.

PS: Want to see something really cool? Here's a sneak peak at Finale 2011!

Tags: , , , ,

Tom Johnson

Comments

5/12/2010 10:43:52 AM #

pingback

Pingback from topsy.com

Twitter Trackbacks for
        
        Take a sneak peek at Finale 2011!
        [finalemusic.com]
        on Topsy.com

topsy.com

5/12/2010 11:32:20 AM #

pingback

Pingback from 209.unlockiphone30.net

Truck 320i Body, 1977 Bmw 320i Fuel Pump Oxygen Sensor - 209.unlockiphone30.net

209.unlockiphone30.net

7/9/2010 3:11:28 AM #

Luan

I used this function to write the arrangement over a vocal recording, and it was very useful.
However I needed to add more than 1 audio track, and that isn't possible still.
Also, there was this weird thing: if you wanted to listen to everything starting on x measure, and you clicked on a staff, it would sound everything but the audio track, and if you clicked outside any staff, everything including the audio played.

Luan Argentina

7/9/2010 11:05:26 AM #

justin w. phillips

Hi Luan,

Which version of Finale are you using?  I have not seen this behavior before.

-Justin

justin w. phillips United States

7/27/2010 8:44:45 PM #

Timmy

Is there a way to slow down the audio playback?  For use with transcribing, it would be great if I didn't have to use an external audio program to generate a slowed down version just because Finale can't slow it down within the IDE.  

Unless I can slow down the audio track, I am limited to what I can do when transcribing a part.

Idea: allow for audio track and staff/notation track to have independent speeds (tempos) that can be "locked".  I would make the audio speed be a percentage.  By default, the would be unlocked.  For transcribing I would:

1. Import the audio track
2. Write a simple part like the bass line (out of sync with the audio track - since I have not assigned the correct tempo to the notation yet)
3. Tap out, or adjust the tempo until the real-time (100%) audio track and notated base line are in sync.
4. Lock the audio & music notation speeds.
5. Change the audio track to 50% and the following happens
   a. Audio track plays at half speed retaining the original pitch
   b. Bass line is still in sync and notation playback slows down to 50% as well.

Perhaps ONLY adding a scale factor to the playback of both the audio track and notation ("global" scale factor) would be sufficient.  Independent would allow for changing the speed of the audio track while keeping the notation tempo/speed the same.  However, I would probably rarely use this.

Timmy

Timmy United States

8/1/2010 12:39:45 AM #

justin w. phillips

Hi Timmy,

Unfortunately there is not a feature yet that allows Finale to slow down an audio track.  I can however put your request forth as a feature request for inclusion in a future version.

Thanks,

-Justin

justin w. phillips United States

Comments are closed

Powered by BlogEngine.NET 1.5.0.7
Theme by Mads Kristensen

Welcome!

This blog was created to provide an interactive means to share commentary and tips on the Finale family of music notation products.

RecentComments

Comment RSS